INTERACTIVE DEMO
PreviewRobotics

Robot Pick & Place

Pick a box from one infeed belt, place it on one roller outfeed, and return the robot home in an interactive browser simulation.

Robot · box pick and transfer
Loading robot…
Preparing scene

Browser simulation; no machinery connection or collision validation.

Try the sequence

Read the states and command guards guide or download the JSON/CSV reference.

Select Pick up to approach the box, descend, attach it to the vacuum tool, and lift it. Once the box is held, Place moves it to the roller outfeed, releases it, and retracts the tool. The outfeed then clears before the next box arrives. Home returns the empty robot to its initial pose.

Run cycle performs one complete transfer and returns home; it does not run indefinitely. Pause preserves the current step. Reset restores the scene and the session counter. Commands that cannot run in the current state are disabled.

This is an independent simplified scene derived from ING-MC’s palletizing visualization. It is not an Ignition session, robot program, or commissioned machine. Paths and timings illustrate a sequence, not verified reach, clearance, cycle time, payload, or safety behavior.

Requirements

  • A browser with WebGL 2 and hardware acceleration.