Tool / CALCULATOR
AvailableCAD

Gear reduction calculator

Compare one to three external gear stages, output speed, rotation direction and torque with an explicit efficiency assumption.

Change tooth counts to compare a transmission before choosing a gearbox. The default 20→60, then 20→80 produces 12:1, converting 1500 rpm into 125 rpm. The 95% efficiency per stage is an editable teaching assumption, not a catalog rating.

Each stage is a separate external mesh; the driven gear of one stage shares a shaft with the next driver. An idler inserted within one stage must not be entered as a separate reduction. Read how ratio, speed and torque relate for a worked example and selection limits.

Explore the transmission

External gear pairs in series, connected by compound shafts.

Stage 1
Stages in series
Stage 2
Stages in series
1,500 rpm→ Stage 1: 500 rpm→ Stage 2: 125 rpm
Total ratio
12:1
Output speed
125 rpm
Ideal torque
24 N·m
Torque with assumed efficiency
21.66 N·m
Assumed total efficiency
90.25 %
Input / output power
314.159 / 283.529 W
Rotation direction
Same as input

Efficiency is an editable assumption, not a measurement. This does not size teeth, shafts, bearings or a manufacturable housing. Internal, planetary and worm gears are excluded.