
The pin map uses revision R02. Revision R01 uses a different Z datum; its anchors must not be combined with R02 geometry.
What the R02 model is for
The board is an UNO-format ESP32 visual and semantic asset for Three.js and Ignition, not manufacturing CAD. It uses metres, a right-handed Z-up coordinate system, and a BoardRoot reference; the underside is at Z=0. The nominal board envelope is 68.6 × 53.4 mm, with 2.54 mm header pitch. ESP32-WROOM-32 module dimensions follow the Espressif module drawing.
The board outline and some component placements are based on reference images. Mounting-hole centres and component heights are approximate; the model is not suitable for fabrication or close-fit design without physical verification.
Treat the pin map as structured data
The R02 model has 26 usable GPIO anchors and nine usable power/reset anchors. Six flash-related anchors are reserved and marked unusable. GPIO35 and GPIO36 follow the RIOT Wemos D1 R32 mapping reference.
Pin targets are empty semantic nodes in the main GLB; visible markers are a separate overlay. The metadata stores node names and positions for annotation workflows. These visual anchors do not connect to hardware or report physical signal states.
What was checked
The R02 model passed checks for consistent pin coordinates across exports, mounting-hole openings, and expected component and anchor structure. It contains 49 functional components and 227 closed solids; four mounting holes remain open. These checks do not establish electrical correctness, fabrication tolerances, enclosure fit, or RF performance. The antenna is a visual reconstruction, not a validated RF design.
Before designing an enclosure, shield, or close-fit part, compare the relevant dimensions with a physical HW-707 and its authoritative mechanical data.
References and publication boundary
References include the RIOT Wemos D1 R32 board page, its Arduino-to-GPIO mapping, and the Espressif ESP32-WROOM-32 datasheet. Positions derived from images remain estimates.
The GLB, anchor overlay, and metadata are not available for download while redistribution permission is being confirmed.