INTERACTIVE DEMO
PreviewCADThree.js

Pallet Stretch Wrapper

Run a wrapping sequence, inspect the machine components, and follow the film from the roll to the rotating pallet.

Stretch wrapper · cycle and components
Loading stretch wrapper…
Preparing scene

Explanatory animation; it does not measure film consumption or control a machine.

Follow the film application

Select Run cycle to observe the preparation, carriage ascent, top overlap, descent and bottom overlap. Pause holds the current step; Reset scene restores the initial pose. Playback speed changes the animation, not a machine setting or a production rate.

The free film span leaves the roll tangentially and meets the rotating load. A short applied strip travels with the pallet; the translucent sleeve shows the accumulated coverage. Hide the film to inspect the mechanism behind it.

Inspect the components

Select a component in the model or use the component list to highlight it and read its role. The table and load rotate together, the carriage moves vertically, and the table drive remains fixed to the base.

This original ING-MC representation uses illustrative geometry and timing. It does not calculate film tension, pre-stretch, consumption or load stability. Cutting and clamping are conceptual; there is no PLC, machine connection or validated safety function. It is not manufacturer CAD or a fabrication design.

Requirements

  • A browser with WebGL 2 and hardware acceleration.